Pioneer Dv420vk Owner's Manual - Page 15

Connections Section 03 English Notes  This player's interface is designed based on the High-Definition Multimedia Interface specification.  When an HDMI-compatible device is connected, the resolution is displayed on the front panel display.  The resolution of the video signals output from the player's HDMI OUT terminal is changed manually. Change the HDMI Resolution setting (page 32). Settings for two units can be stored in the memory.  This player is designed for connection to HDMI-compatible devices. It may not operate properly if connected to DVI devices. Connecting to a TV Player's rear panel VIDEO OUT DIGITAL PB AUDIO OUT COAXIAL AUDIO OUT L PR Y R HDMI OUT COMPONENT VIDEO OUT S-VIDEO OUT HDMI cable (commercially available) To HDMI input terminal Match the direction of the plug to the terminal and insert straight. TV Connecting to an AV receiver or amplifier Player's rear panel VIDEO OUT DIGITAL PB AUDIO OUT COAXIAL AUDIO OUT L PR Y R HDMI OUT COMPONENT VIDEO OUT S-VIDEO OUT HDMI cable (commercially available) To HDMI input terminal Match the direction of the plug to the terminal and insert straight. AV receiver or amplifier From HDMI output terminal HDMI cable (commercially available) To HDMI input terminal TV About video/audio signals output from the HDMI OUT terminal Video signals (resolution of) that can be output from the player's HDMI OUT terminal  720 x 480 pixel progressive or interlaced video  1 280 x 720 pixel progressive video  1 920 x 1 080 pixel progressive or inter‑ laced video Audio signals that can be output from the player's HDMI OUT terminal  44.1 kHz to 96 kHz, 16-bit/20-bit/24-bit 2-channel linear PCM audio (including 2-channel downmixing)  Dolby Digital 5.1-channel audio  DTS 5.1-channel audio  MPEG audio En 15