Pioneer Dv420vk Owner's Manual - Page 30

Section 05 Changing the Settings (Initial Settings) Digital Audio Out settings Options settings Settings LPCM (2CH) Multichannel audio signals are converted to 2-channel linear PCM audio signals for output. This can be selected when the connected HDMI-compatible device does not support multichannel audio. HDMI Out Auto Audio signals supported by the connected HDMI-compatible device (Dolby Digital, DTS, MPEG and linear PCM) are output. Audio signals not supported by the connected HDMI-compatible device are converted to linear PCM for output. Off No audio signals are output from the HDMI OUT terminal.  The settings can only be changed when the player and HDMI-compatible device are connected using an HDMI cable.  If the connected HDMI-compatible device is not compatible with DTS audio, the DTS audio signals are not output (the DTS audio signals are not converted to linear PCM signals for output). On Digital Out Off Audio signals are output from the DIGITAL AUDIO OUT termi‑ nals. No audio signals are output from the DIGITAL AUDIO OUT ter‑ minal. When Digital Out is set to Off, the audio signals output from the HDMI OUT terminal are converted to linear PCM. Dolby Digital Dolby Digital audio signals are output. Select this when the con‑ nected AV receiver or amplifier supports Dolby Digital audio. Dolby Digital Out Dolby Digital audio signals are converted to linear PCM audio Dolby Digital > PCM signals for output. Select this when the connected AV receiver or amplifier does not support Dolby Digital audio. DTS DTS Out Off DTS audio signals are output. Select this when the connected AV receiver or amplifier supports DTS audio. DTS audio signals are not output. Select this when the connected AV receiver or amplifier does not support DTS audio. When the connected AV receiver or amplifier does not support DTS audio, set Off. Noise may be generated if DTS is set. 96 kHz PCM Out 96kHz > 48kHz 96kHz 96 kHz audio signals are converted to 48 kHz/44.1 kHz audio signals for output. Select this when the connected AV receiver or amplifier does not support 96 kHz audio. 96 kHz audio signals are output. Select this when the connected AV receiver or amplifier supports 96 kHz audio. MPEG MPEG audio signals are output. Select this when the connected AV receiver or amplifier supports MPEG audio. MPEG Out MPEG > PCM MPEG audio signals are converted to linear PCM audio signals for output. Select this when the connected AV receiver or amplifier does not support MPEG audio. The factory default settings are indicated in italic. 30 En