Pioneer Dv420vk Owner's Manual - Page 41

Additional information Appendix 06 English Problem KURO LINK function does not work. Check Is the HDMI cable you are using a High Speed HDMI™ cable? Is KURO LINK set to On on the player? Does the connected device sup‑ port the KURO LINK function? Is KURO LINK set to On on the connected device? Are multiple players connected? The message CEC200 appears. Is the player's power turned off? Remedy Use a High Speed HDMI™ cable. The KURO LINK function may not work properly if HDMI cable other than a High Speed HDMI™ cable is used. Set KURO LINK to On on the player (page 34). The KURO LINK function does not work with devices of other brands, even if connected using an HDMI cable. The KURO LINK function will not work if devices that do not support the KURO LINK function or devices of other brands are con‑ nected between the KURO LINK-compatible device and the player. Even when connected to a Pioneer product compatible with the KURO LINK function, some of the functions may not work. Also refer to the operating instructions of the connected device. Set KURO LINK to On on the connected device. The KURO LINK function operates when KURO LINK is set to On for all devices connected to the HDMI OUT terminal. Once connections and settings of all the devices are finished, be sure to check that the player's picture is output to the Flat Panel TV. (Also check after changing the connected devices and connecting and/or disconnecting HDMI cables.) If the player's picture is not being output to the Flat Panel TV, the KURO LINK function may not work properly. For details, refer to the operating instructions of the connected device. The KURO LINK function may not work if three or more players, including this player, are connected by HDMI cable. When the Disc Navigator is selected using the Flat Panel TV's remote controller, the message CEC200 is displayed if the player's power is turned off. This is not a malfunc‑ tion. You may continue using the player and Flat Panel TV as such. En 41