Pioneer KRP-600M Owner's Manual - Page 18
Drill holes in the table or platform edge at the marked locations.
![]() |
UPC - 012562899503
View all Pioneer KRP-600M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
8 mm to 15 mm (3/8 inch to 5/8 inch) 4 mm (5/32 inch) 02 Install Your Flat Panel Display Follow the steps below to secure your flat panel display. 1 ) Mark locations for metal fittings and screws on the back edge of the table using the panel stand to determine placement. (KRP-600M) 20 mm (13/16 inch) min. Wood screw (commercially available, 4 mm x 20 mm (5/32 inch × 13/16 inch) min.) Falling prevention metal fitting (supplied with the optional stand) 2 ) Drill holes in the table or platform edge at the marked locations. 3 ) Lift panel into place with the assistance with at least one other person. 4 ) Use wood screws (not included) to secure the metal fittings to the table. 18 En
![](/manual_guide/products/pioneer-krp-500m-owners-manual-c143a02/18.png)
18
En
02
Install Your Flat Panel Display
Follow the steps below to secure your flat panel display.
1 )
Mark locations for metal fittings and screws on the back edge of the table using the panel stand to determine
placement.
2 ) Drill holes in the table or platform edge at the marked locations.
3 ) Lift panel into place with the assistance with at least one other person.
4 ) Use wood screws (not included) to secure the metal fittings to the table.
(KRP-600M)
20 mm
(13/16 inch)
min.
8 mm to 15 mm
(3/8 inch to 5/8 inch)
4 mm
(5/32 inch)
Falling prevention
metal fitting
(supplied with the
optional stand)
Wood screw
(commercially
available,
4 mm x 20 mm
(5/32 inch ×
13/16 inch)
min.)