Pioneer KRP-600M Owner's Manual - Page 19

Install Your Flat Panel Display 02 English Connect the speaker cables (speaker) Black  Red  Connect the speaker cables (flat panel display) Black Gray lined Connect the gray-lined cable to the  terminals and the black cable to the  terminals. Connect the cable with a red connector to R (right) terminal and the cable with a white connector to L (left) terminal of the flat panel display. Speaker terminals (KRP-600M) Speaker terminals Speaker cable Speaker terminals How to connect the speaker cables • If you insert the speaker cable too far so that (speaker) the insulation is touching the speaker Press the lever and insert the end of the cable. When you release the lever, it clamps onto the speaker cable. Press and hold the lever when Lever removing the cable. How to connect the speaker cables Lever terminal, you may not get any sound. Please insert it so that the copper wire is still showing. • Check if the ends of the speaker cables are securely connected to the terminals by slightly tugging on the cables after making connections. Loose connections may result in sound (flat panel display) Insert the speaker cable connector securely into the panel's speaker dropouts or noise. • If there is a short in the  and  cables caused by an exposed lead wire, excessive load may be applied to the flat terminal. To remove the speaker cable, hold and push the lever then remove it. panel display, resulting in interrupted operation or malfunction. • Incorrect connections of the speaker cable to the left or right flat panel display terminals with respect to polarity Notes: • Before connecting the speakers to the flat panel display, unplug the panel from the power outlet. Connecting the speaker cable with the power cord plugged in can cause malfunction or damage to the panel if the cable's bare wire touches other equipment. Plug in the power cord after connecting the speakers. • Insert the speaker cable straight into the terminal. may result in insufficient stereo sound effects, delivering poor bass sounds or unstable sound image. • Do not connect any devices to the speaker terminals other than the speakers specified. • Excessive force exerted on the speaker cable may cause connection failures, sound dropouts and/or connector damage. • If the speaker cable connector becomes separated from the speaker cable, consult with your dealer. Inserting it in an angle will result in a faulty connection and no sound may come out of the speaker. If no sound comes out of the speaker, reinsert the cable. 19 En