Pioneer KRP-600M Owner's Manual - Page 78

06 Use Other Equipment With Your Flat Panel Display • Banner Input: determines the input signal for the small window in P-in-P mode Parameter Description Translucent On adjusts the translucent rate Off* No effect Banner PIP Off* No effect Bottom 1 through 3 adjusts display positions Mid Low/High Top 1 through 3 Banner Input INPUT 3* through 6 determines the input signal *Factory default 1080 810 540 270 1920 MID HIGH MID LOW TOP 3 TOP 2 TOP 1 The Banner sub-screen option uses only the top 1/4 of a PC signal input. When adding a picture or text, the image or text must be placed in the top 1/4 area. BOTTOM 3 BOTTOM 2 BOTTOM 1 Note: The higher the resolution becomes on the main screen image, the lower the contrast becomes on the small window image. Signals that support Banner PIP are XGA 60 Hz and WXGA 60 Hz. IP Control Lock This locks or unlocks the IP Control settings. Parameter On Off* Description locks the IP Control settings No effect *Factory default Note: This setting applies to all input sources. Network ID Beacon This option authenticates the connection between the specified equipment and the flat panel display. Parameter On Off* Description applies the Network ID Beacon No effect *Factory default 78 En