Pioneer KRP-600M Owner's Manual - Page 52
MONITOR, Yellow
UPC - 012562899503
View all Pioneer KRP-600M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
06 Use Other Equipment With Your Flat Panel Display 6.1.4 Clear Added Manufacturer Codes from the Remote Control To return all learned and preset codes to the defaults (PIONEER), follow the steps below. 1 ) Simultaneously press the EDIT and MONITOR buttons to begin. Selection can be in any mode. 2 ) Press the Yellow button to clear added codes. Confirm that the selected mode indicator flashes. The remote control enters the Manufacturing Reset mode. The reset is complete when the mode indicator flashes once. The remote control then returns to normal operation. Note: The panel's remote control may not control or have complete control of some equipment listed in the tables. MONITOR INPUT 1 2 3 4 MENU ON D EMAND FAVORITE SOURCE DVD/HDD RECEIVER VOL INPUT SELECT BDP EDIT/LEARN MONITOR STB LD VCR CBL DVD SAT DVR To exit before the reset is complete, press the EDIT button again. The reset is cancelled if no action is taken within 60 seconds. Switching the Mode during this procedure also cancels the reset. 6.1.5 Control a Pioneer Receiver The flat panel display's remote control has a bank of buttons specifically for controlling a Pioneer receiver. The active buttons, left to right, are as follows: • RECEIVER STANDBY/ON (turns the Pioneer Receiver On/Off) • RECEIVER INPUT (cycles through/selects an input) • RECEIVER VOL - (adjusts the volume lower) • RECEIVER VOL + (adjusts the volume higher) SOURCE DVD/HDD RECEIVER VOL INPUT SELECT BDP EDIT/LEARN MONITOR STB LD VCR CBL DVD SAT DVR 52 En