Pioneer KRP-600M Owner's Manual - Page 62
KURO LINK Setting, Control Setup, Input Setting
UPC - 012562899503
View all Pioneer KRP-600M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
06 Use Other Equipment With Your Flat Panel Display To connect a device for KURO LINK, follow the steps below. 1 ) Turn on the flat panel display and all other equipment. 2 ) Confirm that the panel's Input Setting for KURO LINK Setting options comply with directions in the device(s)' operating instructions. 3 ) Confirm that the other equipment is set for KURO LINK. 4 ) Check that the audio and video are playing back properly from the equipment connected through the HDMI terminal(s). 5 ) Turn Off the flat panel display. 6 ) Pause for a few seconds before turning the panel back on. 7 ) Verify that all equipment is functioning properly. To select the device to control via KURO LINK, follow the steps below. 1 ) Access KURO LINK Setting through the Control Setup menu. 2 ) Select Input Setting from the submenu. KURO LINK Setting Input Setting : Power Off Control : Power On Ready : Hold Sound Status : INPUT 5 Off Off Off Power On Test Power Off Test 3 ) Select the desired Input (INPUT 5 or INPUT 6). 4 ) Press EXIT to exit the menu. If operating an HDMI-supported device using an HDMI port other than the terminal selected in Input Setting, the system malfunctions. When connecting to an HDMI terminal other than that selected in Input Setting, the equipment settings should block KURO LINK functions. The KURO LINK menu is not selectable when the option Input Setting under the KURO LINK Setting menu is set to Off. The control menu changes to suit the type of HDMI-compatible equipment. When adding, changing, or removing equipment from KURO LINK, refer to the sections below for installation notes and the supported commands. 6.4.1 Control an AV System When adding an AV System, connect the unit between the panel and any recorders and/or players. To function properly, your Audio/Video system manages the KURO LINK functions between the panel and any other connected equipment. 62 En