Pioneer PRO-810HD Owner's Manual - Page 18
Connection of G ON SYNC analog RGB source
View all Pioneer PRO-810HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
English Installation and Connections When connecting to ANALOG RGB IN (INPUT1) ANALOG RGB IN D-Sub IINNPPUUTT11 AUDIO R L HDMI When using D-sub INPUT for INPUT1, select [D-sub] in [INPUT1 SELECT] in the menu (page 23). Note You cannot simultaneously use the HDMI INPUT and this INPUT. On-screen setup is necessary after connection. Please see pages 23 to 25. When connecting to ANALOG RGB (INPUT5) ANALOG RGB INPUT5 G(ON SYNC) B R HD (H/V SYNC) VD Connect the cable corresponding to the shape of the input terminal on the display and the personal computer's output terminal. Secure by tightening the terminal screws on both units. When using D-sub INPUT for INPUT1, select [D-sub] in [INPUT1 SELECT] in the menu (page 23). Note You cannot simultaneously use the HDMI INPUT and this INPUT. On-screen setup is necessary after connection. Please see pages 23 to 25. Note Depending on the type of computer model being connected, a conversion connector or adapter etc. provided with the computer or sold separately may be necessary. For details, please read your PC's instruction manual or consult the maker or nearest dealer of your computer. Connection of G ON SYNC analog RGB source Make G ON SYNC connections for a personal computer with output that has the synchronization signal layered on top of the green signal. When connecting to ANALOG RGB IN (INPUT1) On-screen setup is necessary after connection. Please see pages 23 to 25. Note When making G ON SYNC connections, do not make any connections to the VD or HD jacks. If connections are made, the picture may be not displayed normally. ANALOG RGB IN D-Sub IINNPPUUTT11 AUDIO R L HDMI Installation and Connections 14 EN