Pioneer PRO-810HD Owner's Manual - Page 20

English Installation and Connections Connection to INPUT2 Connect an AV component with a digital video output (digital set top box, DVD player, etc.) compatible with HDCP (High-bandwidth Digital Content Protection). Before attempting to connect one of these components, read its operating instructions to make sure that it can be connected. AUDIO INPUT2 R L HDMI Connection to INPUT4 Connect an AV component that has a video output jack to INPUT4 jack. The VIDEO OUT (INPUT4) jack can be used to output the video signal to a separate monitor, recording device or other component with video input capability. Note A video signal will not be output from the VIDEO OUT (INPUT4) jack when the main power of this display is off or in standby mode. VIDEO INPUT4 IN OUT To a monitor or a recording device AV component with a digital video output After connection is made, on-screen setup is necessary to match the connected component. Please see page 25 to 27. Notes ÷ Use a HDMI (High Definition Multimedia Interface) cable for connection. ÷ When connecting a component with DVI connector, use an DVI / HDMI conversion cable to make a connection. ÷ It is not a jack intended to be used with a personal computer. ÷ See appendix 1 (page 52) for information regarding signal and display formats supported by INPUT2. Connection to INPUT3 Connect an AV component that has S-video output jack to S-VIDEO (INPUT3) jack. S-VIDEO INPUT3 AV component Installation and Connections AV component 16 EN