Pioneer PRO-810HD Owner's Manual - Page 41

3 LOW 2 3 MID LOW 2 3 MID 2 3 MANUAL/**2 3 HIGH 2 3 MID HIGH 2 ¶ LOW ......... Provides yellowish color tone with low warmth. ¶ MID-LOW ... Provides a color tone between MID and LOW. ¶ MID ......... Provides natural color tone (Standard). ¶ MID-HIGH ... Provides color tone between HIGH and MID. ¶ HIGH ......... Provides a bluish, very warm color tone. ¶ MANUAL/**... Saves desired adjusted color temperature settings. The abbreviations of the color tone modes on which manual adjustments are based are indicated in the ** section as shown below. LOW -> LO, MID LOW -> ML, MID -> MD, MID HIGH -> MH, HIGH -> HI Decrease Increase R. HIGH ... Adjusts the red of bright parts Becomes softer Becomes stronger G. HIGH ... Adjusts the green of bright parts Becomes softer Becomes stronger B. HIGH ... Adjusts the blue of bright parts Becomes softer Becomes stronger R. LOW ... Adjusts the red of dark parts Becomes softer Becomes stronger G. LOW ... Adjusts the green of dark parts Becomes softer Becomes stronger B. LOW ... Adjusts the blue of dark parts Becomes softer Becomes stronger Notes ÷ This setting is not possible when in the DYNAMIC mode in [AV SELECTION]. ÷ If you adjust R. HIGH, G. HIGH, B. HIGH, R. LOW, G. LOW or B. LOW, COLOR TEMP. automatically switches to MANUAL/ **. ÷ R. HIGH, G. HIGH, B. HIGH, R. LOW, G. LOW and B. LOW adjustment values are reflected in COLOR TEMP. MANUAL/** settings. The values are not reflected if anything other than MANUAL/** is selected. When adjusting color temperature to desired settings 1 With COLOR TEMP., use the 2/3 buttons to set the color temperature close to that desired, then press the SET button. 2 With R. HIGH, G. HIGH, B. HIGH, R. LOW, G. LOW or B. LOW, use the 2/3 buttons to make fine adjustments to the settings made in 1, then press the SET button. 3 The adjusted values made in 2 in COLOR TEMP. MANUAL/** is saved. ¶ Setting items during PC signal input GRADATION This function sets picture γ characteristics. Each time you press the 2/3 buttons, the setting changes as follows: 3 GAMMA1.8 2 3 GAMMA2.0 2 3 GAMMA2.2 2 Picture and Screen Adjustment ¶ GAMMA1.8 ... Provides a brighter γ setting than standard. ¶ GAMMA2.0 ... Provides standard brightness γ characteristics. ¶ GAMMA2.2 ... Provides darker γ characteristics than standard. The following functions make fine adjustments to color temperature (white color tone). R. HIGH ... Adjusts the red of bright parts G. HIGH ... Adjusts the green of bright parts B. HIGH ... Adjusts the blue of bright parts R. LOW ... Adjusts the red of dark parts G. LOW ... Adjusts the green of dark parts B. LOW ... Adjusts the blue of dark parts Decrease Becomes softer Becomes softer Becomes softer Becomes softer Becomes softer Becomes softer Increase Becomes stronger Becomes stronger Becomes stronger Becomes stronger Becomes stronger Becomes stronger Picture Adjustment (3) You can save picture adjustment values for each INPUT and each AV SELECTION mode. MENU 5/∞ 2/3 SET MENU 2/3 SET 5/∞ AV SELECTION Display operating panel Remote control unit 1 Press the AV SELECTION button to select the desired mode (Refer to page 33). 2 Press the MENU button to display the menu. S TA N D A R D PICTURE SCREEN SETUP CONTRAST BRIGHTNESS COLOR TINT SHARPNESS MPEG NR DNR CTI :0 :0 :0 :0 :0 : MID : MID : ON INPUT1 OPTION PICTURE RESET SET ENTER MENU EXIT 37 EN Picture and Screen Adjustment English