Pioneer SC-99 Owner s Manual - Page 46
Connect a separate receiver to this receiver's HDMI OUT 3 terminal.
![]() |
View all Pioneer SC-99 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
03 Connecting your equipment MULTI-ZONE setup using HDMI terminal (HDZONE) Important ! MAIN/HDZONE at ZONE Setup must be set to HDZONE in order to use the HDZONE function (page 117 ). ! To use the HDZONE functions, set Control or Control Mode in HDMI Setup to OFF. For details, see HDMI Setup on page 85 . % Connect a separate receiver to this receiver's HDMI OUT 3 terminal. Connect speakers and a TV to the HDZONE receiver as shown on the illustration below. Sub zone (HDZONE) Main zone 1 MAIN ARC CONTROL HDMI OUT 2 3 (HDZONE) SELECTABLE HDMI OUT 1 2 MAIN 3 (HDZONE) ARC CONTROL SELECTABLE HDMI IN Multi-zone connection using the HDMI terminal and speaker terminals (HDZONE) Important ! The settings must be changed at ZONE Setup in order to use the HDZONE function (page 117 ). ! To use the HDZONE functions, set Control or Control Mode in HDMI Setup to OFF. For details, see HDMI Setup on page 85 . ! It is neccessary to set the Speaker System to 7.2ch + HDZONE, 5.2 Bi-Amp+HDZONE, or 5.2 +ZONE 2+HDZONE (page 113 ). 1 Connect the speakers to the EXTRA 1 terminals, or the SURROUND BACK terminals. Which speaker terminal is connected defers depending on the Speaker System (page 113) setting. For details, see Installing your speaker system on page 27 . The following diagram shows the connection with the EXTRA 1 speaker terminals. 2 Connect a TV monitor to the HDMI OUT 3 (HDZONE) terminal on this receiver. Sub zone (HDZONE) HDMI IN 2 Main zone 1 MAIN HDMI OUT 2 3 (HDZONE) 1 MAIN ARC CONTROL HDMI OUT 2 3 (HDZONE) SELECTABLE EXTRA 1 R L ARC CONTROL SELECTABLE L R EXTRA 1 R L 1 46
![](/manual_guide/products/pioneer-sc97-owner-s-manual-21b9244/46.png)