Pioneer SC-99 Owner s Manual - Page 70

05 Basic playback Pairing with the unit (Initial registration) In order for the unit to playback music stored on a Bluetooth capable device, pairing must first be performed. Pairing should be performed when first using the unit with the Bluetooth capable device, or when the pairing data on the device has been erased for any reason. Pairing is a step required to allow communication using Bluetooth wireless technology to be carried out. ! Pairing is performed the first time that you use the unit and the Bluetooth capable device together. ! In order to allow communication using Bluetooth wireless technology to take place, pairing must be performed on both the unit and the Bluetooth capable device. ! After pressing the BT and switching to BT AUDIO input, perform the pairing procedure on the Bluetooth capa- ble device. If pairing has been performed correctly, you will not need to perform the pairing procedures for the unit as shown below. Please refer to the user's manual for your Bluetooth capable device for more details. 1 Press BT and after choosing the input for BT AUDIO, perform operations 2 and 3 within 5 minutes. 2 Turn on the power to the Bluetooth capable device that you wish to pair with, and perform pairing procedure on it. Pairing will start. ! Place the Bluetooth capable device close to the unit. ! Please refer to the user's manual for your Bluetooth capable device for details on when pairing can be per- formed and the procedures required for pairing. ! The name of this receiver indicated on the equipment that has the Bluetooth functionality is "SC-99 XXXXXX (equipment unique symbol)" or "SC-97 XXXXXX (equipment unique symbol)". ! When PIN code entry is requested, enter 0000. (This unit does not accept any PIN code setting other than 0000.) 3 Confirm on the Bluetooth capable device that pairing has been completed. If pairing with the Bluetooth capable device has been completed correctly, CONNECTED will be displayed on the front panel of the unit. Listen to music on the unit from a Bluetooth capable device 1 A Bluetooth connection will be created between the Bluetooth capable device and the unit. Procedures for connecting to the unit should be performed from the Bluetooth capable device. ! Please refer to the user's manual for your Bluetooth capable device for details of the connection procedures. 2 Playback music from the Bluetooth capable device. This receiver's remote control buttons can be used for basic playback of files stored on Bluetooth wireless technology devices. ! When the Network Standby and Bluetooth Setup for Network, Bluetooth settings are set as ON, the main power of this receiver will automatically be on by playing the equipment using the Bluetooth function. However, when network communication becomes disconnected, it will switch from the network standby mode to normal standby mode. In such case, turn the power on with the remote controller and play. ! When play is started on the equipment with the Bluetooth function, the zone input set at Play ZONE Setup will automatically switch to BT AUDIO. ! Depending on the Bluetooth wireless technology device you use, operation may differ from what is shown in the remote control buttons. 3 While listening to a source, set the remote control to the receiver operation mode, then press ADV repeatedly to select SOUND RETRIEVER AIR. Notes ! With this receiver, when an iPod is connected or disconnected while the music of a Bluetooth wireless technol- ogy device is playing, the connection with the Bluetooth wireless technology device may be canceled. ! The SOUND RETRIEVER AIR listening mode can only be selected when the BT AUDIO input. ! Playback screen information may not appear properly on this receiver depending on the Bluetooth enabled device being used. 70