Ricoh 2020D Copy Reference - Page 20

Turning Off the Power A Press the operation switch. The On indicator goes off. ZENH080E Note ❒ Even if you press the operation switch, the indicator does not go out, but blinks in the following cases: • During communication with external equipment. Turning Off the Main Power Important ❒ Do not turn off the main power switch when the On indicator is lit or blinking. Doing so may result in damage to the memory. ❒ Make sure 100% is shown as available memory on the initial scanner display before turning off the main power switch. ❒ Be sure to turn off the main power switch before pulling out the power plug. Not doing this may result in damage to the memory. A Be sure the On indicator is not lit. B Turn off the main power switch. The main power indicator goes out. -When the fax unit (optional) is installed When the main power switch is turned off while using the fax function, waiting fax and print jobs may be canceled, and incoming fax documents not received. If you have to turn off this switch for some reason, keep the following points in mind: Important ❒ Make sure 100% is shown as available memory on the display before turning off the main power switch or unplugging the power cord. Fax files in memory are deleted an hour after you turn off the main power switch or unplug the power cord. See "Turning Off the Main Power/In Case of a Power Failure", Facsimile Reference . ❒ If the On indicator does not go out, but blinks in dial-in mode even if you press the operation switch, check the explanations below and turn off the main power switch. • the computer is not controlling the machine. • the machine is not receiving a fax. 12