Ricoh 2020D Copy Reference - Page 67
Moving, Power Connection
View all Ricoh 2020D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Where to Put Your Machine Moving R CAUTION: • Unplug the power cord from the wall outlet before you move the machine. While moving the machine, you should take care that the power cord will not be damaged under the machine. R CAUTION: • Before moving the machine, be sure to pull all four handles fully out. If not, an injury might occur. After moving the machine, return the four handles to their original positions. • When the optional paper tray unit is installed, do not push the upper part of the main unit horizontally. An injury might occur if the paper tray unit becomes detached from the main unit. Important ❒ Be careful when moving the ma- chine. Take the following precautions: • Turn off the main power. See p.12 "Turning Off the Main Power". • Unplug the power cord from the wall outlet. When you pull out the plug from the socket, grip the plug to avoid damaging the cord, thereby reducing the risk of fire or electric shock. • Close all covers and trays, including the front cover and bypass tray. ❒ Do not take off the holding stand. ❒ Protect the machine from strong shocks. Impact can damage the memory. Power Connection R WARNING: • Connect the machine only to the power source described on the inside front cover of this manual. Connect the power cord directly into a wall outlet and do not use an extension cord. • Do not damage, break or make any modifications to the power cord. Do not place heavy ob- jects on it. Do not pull it hard nor bend it more than neces- sary. These actions could cause an electric shock or fire. 5 R CAUTION: • Unplug the power cord from the wall outlet before you move the machine. While moving the machine, you should take care that the power cord will not be damaged under the machine. R CAUTION: • When you disconnect the power plug from the wall outlet, always pull the plug (not the cable). • When the main power switch is in the stand-by position, the optional anti-condensation heaters are on. In an emergency, unplug the machine's power cord. • When you unplug the power cord, the anti-condensation heaters turn off. • Make sure the plug is inserted firmly in the wall outlet. • Voltage must not fluctuate by more than 10%. • The wall outlet shall be installed near the machine and shall be easily accessible. 59