Ricoh 2020D Copy Reference - Page 47

3. Troubleshooting If Your Machine Does Not Operate As You Want When a Message Is Displayed The following chart contains explanations for common messages. If other messages appear, follow the instructions as they are displayed. Note ❒ For messages not listed here, see General Settings Guide. Message Causes Solutions Cannot detect original size Improper original is placed. See p.17 "Sizes difficult to detect". Select paper manually, not with the Auto Paper Select function, and do not use the Auto Reduce/Enlarge function. Input the both horizontal and vertical sizes of the non-standard original. Place the original on the exposure glass. See p.18 "Placing Originals on the Exposure Glass" . Original is not placed. Place your originals. Check original orientation Original is not placed in the proper orientation. Change original orientation. Check paper size Improper paper size is If you press the {Start} key, set. copy will start onto the select- ed paper. Rotate Sort is unavailable with this paper size A size of paper for which Rotate Sort is not available is selected. Select a proper paper size. See p.30 "Sort". Cannot dup. copy this size A paper size not available with the Duplex function has been selected. The following paper sizes are available for the Duplex function: A3L, B4 JISL, A4KL, B5 JISKL, A5KL. Select one of these sizes. Max. number of sets is * The number of copies exceeds maximum copy quantity. You can change the maximum copy quantity. See p.54 "Max. Number of Sets" . 39