Ricoh 2020D Copy Reference - Page 30

Copying Copying from the Bypass Tray Use the bypass tray to copy onto OHP transparencies, thick paper, envelopes and copy paper that cannot be loaded in the paper trays. A Open the bypass tray. 2 Important ❒ Paper longer than 433 mm may be- come wrinkled, may not feed in, and may jam. Note ❒ If you do not use standard size copy paper, or if you use special paper, you should enter its vertical and horizontal dimensions. See p.20 "Placing custom size originals". The sizes you can enter are as follows: ZENY100E B Push up the paper guide release lever. Metric • Vertical: 90-297 mm version • Horizontal: 148-600 mm Inch • Vertical: 3.55"-11.69" version • Horizontal: 5.83"-23.62" ❒ The machine can automatically detect the following sizes as regular size copy paper: Metric A3L, A4KL, A5KL, 8" × version 13"L Inch 11" × 17"L, 81/2" × 11"KL, version 51/2" × 81/2"L, 81/2" × 14"L ❒ When copying onto OHP transparencies or paper heavier than 105 g/m2 (about 28 lb.), you need to specify the paper type. See p.24 "When copying onto special paper" . ❒ The maximum number of sheets you can load at the same time depends on paper type. The maximum number of sheets should not exceed the upper limit. 1 1. Paper guide release lever ZENY110E 22