Ricoh 2020D Copy Reference - Page 26
Original Orientation, Placing Originals on the, Exposure Glass
View all Ricoh 2020D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Placing Originals Placing Originals 1 Note ❒ Take care to place originals only af- Placing Originals on the ter any correction fluid and ink has Exposure Glass completely dried. Not taking this A precaution could cause marks on Lift the exposure glass cover, the exposure glass that will be copied onto paper. ADF or ARDF. Important Reference For original sizes you can set, see ❒ Do not lift the exposure glass cover, ADF or ARDF forcefully. p.15 "Originals" . If you do, the ADF or ARDF cover might open or be dam- Original Orientation aged. You can set the original orientation in the following ways. This function is useful for copying torn or large originals. Note ❒ Originals should normally be aligned to the rear left corner. However, some copy functions may produce different results depending on the orientation of the originals. For details, see the explanations of each function. Note ❒ Be sure to lift the exposure glass cover, ADF or ARDF by more than 30°. Otherwise, the size of the original might not be detected correctly. B Place the original face down on the exposure glass. It should be aligned with the rear left corner. Originals ADF or ARDF Exposure glass AAI025S set11EE 1. Positioning mark 2. Left scale Note ❒ Start with the first page to be copied. set23EE C Lower the exposure glass cover, ADF or ARDF. 18