Ricoh 2051 Operating Instructions - Page 30
Interrupt Copy, Left Original Beeper, Copy Face Up - finisher
View all Ricoh 2051 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Copying Important ❒ When Basic Authentication, Win- dows Authentication, or LDAP Authentication is set, always log off when you have finished using the machine to prevent unautho- rized users from using the ma- 2 chine. Interrupt Copy Use this function to interrupt a long copy job to make urgently needed copies. A Press the {Interrupt} key. The Interrupt indicator lights. Note ❒ The previous copy job's set- tings are restored and the machine continues copying from where it left off. When the machine continues copying A Place the originals you want to copy. B Press the {Start} key. The machine stops the previous job and starts copying the new originals. C When copying is complete, remove originals and copies. D Press the {Interrupt} key again. The Interrupt indicator goes out. The previous copy job's settings are restored and the machine continues copying from where it left off. ZGVS030E Left Original Beeper When scanning is interrupted A Remove the originals that were being copied, and then place the originals you want to copy. The beeper sounds and an error message is displayed if you leave originals on the exposure glass after copying. Note B Press the {Start} key. Copying starts. ❒ See p.125 "Tone: Original remains". C When copying is complete, re- move the originals and copies. Copy Face Up D Press the {Interrupt} key again. The Interrupt indicator turns off. Use this function to reverse the order of copies. E When the display prompts you to do so, place the former set of originals again. F Press the {Start} key. 20 Preparation Before using this function, register "Face up" as a copy function key. See p.125 "Copy Function Key: F1F5".