Ricoh 2051 Operating Instructions - Page 43
Directional Size Magnification
View all Ricoh 2051 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
A Press [Reduce/Enlarge]. Copier Functions F Press [OK]. D Press [OK]. E Place the originals, and then press the {Start} key. B Press [Specifd. Ratio]. C Press [Direct. Mag.%]. To enter the ratio using the number keys A Press [Horizontal]. B Enter the ratio using the num- ber keys, and then press [#]. C Press [Vertical]. D Enter the ratio using the num- ber keys, and then press [#]. E Press [OK]. To specify a ratio using [n] and [o] A Press [With no]. B Press [Horizontal]. C Adjust the ratio using [n] or [o]. Note ❒ Pressing [n] or [o] changes the ratio in increments of 1%. Pressing and holding down [n] or [o] changes it in increments of 10%. ❒ If you have incorrectly entered the ratio, readjust it using [n] or [o]. D Press [Vertical]. E Adjust the ratio using [n] or [o]. Directional Size Magnification (Inch) 2 A suitable reproduction ratio is automatically selected when you enter the horizontal and vertical lengths of the original and copy image you require. 1. Horizontal original size 2. Vertical original size 3. Horizontal copy size 4. Vertical copy size Preparation Specify the vertical and horizontal size of the original and that of the copy, as shown. Note ❒ You can enter sizes within the following ranges: Metric version Vertical: 1-999 mm (increments of 1 mm) Horizontal: 1-999 mm (increments of 1 mm) Inch 0.1"-99.9" (increments of 0.1") version 33