Ricoh 2051 Operating Instructions - Page 99
When copying with the Sort/Staple, function
View all Ricoh 2051 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Using Connect Copy ❒ When the number of originals or copies is small, copying will be done on only the main machine. F Press the {Start} key on the main machine. Copying starts on the main machine after the originals are scanned. Copying starts on the sub-machine when data transfer from the main machine is completed. Setting originals on the exposure glass A Set the next original when the machine has finished scanning the first. Press the {Start} key. B When all the pages have been scanned, press the {#} key. Note ❒ If the machine is not in use, it will begin copying. Using Batch mode A Place the originals and press the {Start} key. B After the first set of originals has been fed, place the next set. Note ❒ The next set of originals must be set while the Auto Feed indicator is lit. ❒ To stop scanning or copying, press the {Clear/Stop} key on the main machine, and then follow the instructions on the display. Reference p.16 "Batch" C Collect your copies from both the main and sub machines. Note ❒ The number of copies might differ on the main and sub machines. ❒ Both machines may not finish copying at the same time. ❒ When using the Sort/Staple function, copying is divided between the two machines by the number of sets. If a paper misfeed occurs when 3 processing a set of copes, it is not possible for the other ma- chine to take over the re- mainder of that particular set. -Order of Copy Output ❖ When copying with the Sort/Staple function (Example) Copying 6 sets of a three-page original < 1 > < 2 > 1. Main machine 2. Sub-machine Copies are delivered face-down on both the main and sub machines. When using the Sort/Staple function, the processing of one copy set cannot be divided between the two machines. 89