Ricoh Aficio MP 9002 Manuals - Page 217
Connecting the Machine/ System, Maintenance Using telnet
View all Ricoh Aficio MP 9002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 217 highlights
When Messages Are Displayed on Your Computer Screen Message Causes Solutions "Cannot detect the paper size of the original. Specify the scanning size." The set original was misaligned. • Place the original correctly. • Specify the scan size. • When placing an original directly on the exposure glass, the lifting/ lowering action of the ADF triggers the automatic original size detection process. Lift the ADF by 30 degrees or more. "Cannot find "XXX" scanner used for the previous scan. "YYY" will be used instead." ("XXX" and "YYY" indicate scanner names.) The main power switch of the previously used scanner is not set to "On". Check whether the main power switch of the scanner used for the previous scan is turned on. "Cannot find "XXX" scanner used for the previous scan. "YYY" will be used instead." ("XXX" and "YYY" indicate scanner names.) The machine is not connected to the network correctly. • Check that the previously used scanner is connected to the network correctly. • Cancel the personal firewall of the client computer. For details about firewall, see Windows Help. • Use an application such as telnet to make sure SNMPv1 or SNMPv2 is set as the machine's protocol. For details about how to check this, see "Remote Maintenance Using telnet", Connecting the Machine/ System Settings . • Select the scanner used for the previous scan. "Cannot specify any more scanning area." The maximum number of registerable scan areas has been exceeded. The maximum number of scanning areas that can be stored is 100. Delete unneeded scanning areas. 215