Ricoh Aficio MP 9002 Manuals - Page 63
Copying onto Custom Size Paper from the Bypass Tray
View all Ricoh Aficio MP 9002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Copying onto Custom Size Paper from the Bypass Tray Copying onto Custom Size Paper from the Bypass Tray Paper that has a horizontal length of 139.7-600.0 mm (5.50-23.62 inches) and a vertical length of 100.0-305.0 mm (3.94-12.00 inches) can be fed in from the bypass tray. Note however that the limitation on the horizontal and vertical length range will vary depending on which options are installed. • When prints are delivered to the trays of Finisher SR4060 or Booklet Finisher SR4070: Horizontal length: 139.7-487.6 mm (5.50-19.19 inches), vertical length: 100.0-305.0 mm (3.94-12.00 inches) • When prints are delivered to the upper tray of Finisher SR4080: Horizontal length: 139.7-458.0 mm (5.50-18.03 inches), vertical length: 100.0-305.0 mm (3.94-12.00 inches) • When prints are delivered to the shift tray of Finisher SR4080: Horizontal length: 139.7-458.0 mm (5.50-18.03 inches), vertical length: 139.0-305.0 mm (5.48-12.00 inches) 1. Load the paper face up in the bypass tray. [Bypass] is automatically selected. 2. Press the [ ] key. 3. Press [Paper Size]. 4. Press [Custom Size]. 5. Enter the horizontal size with the number keys, and then press [ ]. 6. Enter the vertical size with the number keys, and then press [ ]. 7. Press [OK] twice. 8. Place the originals, and then press the [Start] key. 61