Ricoh Aficio SP C430DN Safety Information - Page 197

Paper Recommendations Supported paper feed tray Any input tray can be used. Make sure paper is not stacked higher than the upper limit mark ( ) inside the tray. When using the bypass tray, make sure paper is not stacked higher than the paper guides on the bypass tray. Duplex printing Supported Maintenance Default: [Letterhead 2] If prints made using the paper tray show heavy smudging, use the following procedure to change the paper type setting from the control panel: • Press the [Menu] key, select [Maintenance], [General Settings], and then select [Letterhead Setting]. Select the paper tray, and then select one from [Letterhead 1], [Letterhead 2],[ Letterhead 3], [Letterhead 4] or [Letterhead 5]. When specifying paper thickness, remember that a higher number indicates greater thickness. Also, because the paper thickness will normally be detected automatically, change this setting only if a print 6 problem occurs. Label paper Printer setup Printer driver setup Supported paper feed tray Duplex printing Press the [Menu] key, select [Paper Input], [Paper Type: (tray name)], and then select [Label Paper]. Click [Labels] in the "Paper Type:" list. Any input tray can be used. Make sure paper is not stacked higher than the upper limit mark ( ) inside the tray. When using the bypass tray, make sure paper is not stacked higher than the paper guides on the bypass tray. Not supported 127