Ricoh Aficio SP C430DN Safety Information - Page 279

Other Printing Problems For details, see p.180 "Cleaning the Registration Roller". When printing on plain paper, white dots are obvious. • The registration roller is dirty. Clean the registration roller. For details, see p.180 "Cleaning the Registration Roller". Paper Misfeeds Occur Frequently Paper jams occur frequently. • Number of paper set in the tray exceeds the limit. Confirm that the top of the stack is not higher than the limit mark inside the tray. For details, see p.138 "Loading Paper". • There may be a gap between the front guide and the paper, or between the side guides and the paper in the paper tray. Make sure there are no gaps. For details, see p.138 "Loading Paper". • Paper is either too thick or too thin. For details, see p.123 "Types of Paper and Other Media". • Paper is bent or wrinkled. Use paper that have no bents or wrinkles. For details, see p.123 "Paper Recommendations". • Paper has already been printed on. For details, see p.123 "Types of Paper and Other Media". • Paper is damp. Use paper that has been stored properly. For details, see p.123 "Types of Paper and Other Media". 9 • When loading paper, separate paper from each other. Multiple pages are fed at once. • Paper is either too thick or too thin. For details, see p.123 "Paper Recommendations". • Paper has already been printed on. For details, see p.123 "Paper Recommendations". • Number of paper set in the tray exceeds the limit. Confirm that the top of the stack is not higher than the limit mark inside the tray. For details, see p.138 "Loading Paper". • Paper is static. Use paper that has been stored properly. For details, see p.123 "Paper Recommendations". • When loading paper, separate paper from each other. 209