Ricoh Aficio SP C430DN Safety Information - Page 200

6. Paper and Other Media Supported paper feed tray Any input tray can be used. Make sure paper is not stacked higher than the upper limit mark ( ) inside the tray. When using the bypass tray, make sure paper is not stacked higher than the paper guides on the bypass tray. Duplex printing Supported Maintenance 6 Default: [Coated Paper (Matted) 4] If prints made using the paper tray show heavy smudging, use the following procedure to change the paper type setting from the control panel: • Press the [Menu] key, select [Maintenance], [General Settings], and then select [Coated Paper (Matted) Stg.]. Select the paper tray, and then select one from [Coated Paper (Matted) 1], [Coated Paper (Matted) 2], [Coated Paper (Matted) 3], [Coated Paper (Matted) 4], or [Coated Paper (Matted) 5]. When specifying paper thickness, remember that a higher number indicates greater thickness. Also, because the paper thickness will normally be detected automatically, change this setting only if a print problem occurs. Coated Paper (Matted: Thick) Printer setup Printer driver setup Supported paper feed tray Duplex printing Press the [Menu] key, select [Paper Input], [Paper Type: (tray name)], and then select [Coated Paper(Matted:Thick)]. Click [Coated (Matted: Thick Paper)] in the "Paper Type:" list. Any input tray can be used. Make sure paper is not stacked higher than the upper limit mark ( ) inside the tray. When using the bypass tray, make sure paper is not stacked higher than the paper guides on the bypass tray. Not supported 130