Ricoh CL3500N Setup Guide - Page 73
Tighten the two screws to secure the 1394 interface board.
UPC - 026649024344
View all Ricoh CL3500N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Installing Options Make sure that the 1394 interface board is firmly connected to the controller board. E Tighten the two screws to secure the 1394 interface board. ❒ After finishing installation, check the 1394 interface board is installed properly: print the configuration page from the "List/Test Print" menu. If it is installed properly, you will see "IEEE1394 " for "Controller Option". ❒ If the 1394 interface board is not installed properly, reinstall it from the start of the procedure. If you cannot install it properly even after attempting reinstallation, contact your sales or service representative. For details about printing the configuration page, see p.40 "Test Printing". 73
Installing Options
73
Make sure that the 1394 interface board is firmly connected to the controller
board.
E
Tighten the two screws to secure the 1394 interface board.
❒
After finishing installation, check the 1394 interface board is installed prop-
erly: print the configuration page from the “List/Test Print” menu. If it is in-
stalled properly, you will see “IEEE1394 ” for “Controller Option”.
❒
If the 1394 interface board is not installed properly, reinstall it from the start
of the procedure. If you cannot install it properly even after attempting re-
installation, contact your sales or service representative.
For details about printing the configuration page, see
p.40 “
Test Printing
”
.