Ricoh CL3500N Setup Guide - Page 94
Network Setup, Frame Type NW, Frame Type NW, Auto Select
UPC - 026649024344
View all Ricoh CL3500N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Configuration N Press the {U} or {T} key to display [DHCP], and then press the {# Enter} key. Network Setup: DHCP O Press the {U} or {T} key to display [On], and then press the {# Enter} key. DHCP: *On ❒ "p " shows the current setting. ❒ After about two seconds, the display returns to the network setup menu. P If you use NetWare, select the frame type for NetWare. Select one of the items below if necessary. • Auto Select (Default) • Ethernet II • Ethernet 802.2 • Ethernet 802.3 • Ethernet SNAP ❒ Usually, use the default setting ("Auto Select"). When you first select [Auto Select], the frame type detected by the printer is adopted. If your network can use more than two frame types, the printer may fail to select the correct frame type if [Auto Select] is selected. In this case, select the appropriate frame type. Q Press the {U} or {T} key to display [Frame Type (NW)], and then press the {# Enter} key. Network Setup: Frame Type (NW) The current setting appears on the display. R Press the {U} or {T} key to display the frame type you want to use, and then press the {# Enter} key. Frame Type (NW): *Auto Select 94