Ricoh CL3500N Setup Guide - Page 96
IEEE 802.11b Wireless LAN Configuration
UPC - 026649024344
View all Ricoh CL3500N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Configuration IEEE 802.11b (Wireless LAN) Configuration Configure the printer to use IEEE 802.11b (Wireless LAN). The following table shows the control panel settings and their default values. These items appear in the [Host Interface] menu. Setting Name Comm. Mode Channel Trans. Speed SSID WEP Setting Default Value 802.11 Ad hoc • Inch version (1-11) 11 • Metric version (1-13) 13 Auto blank (ASSID) Not Active ❒ To use IEEE 802.11b (Wireless LAN), select [IEEE 802.11b] for [LAN Type] in [Network Setup] in the [Host Interface] menu, and then set [IP Address], [Subnet Mask], [Gateway Address], [DHCP], [Frame Type (NW)] and [Active Protocol] under [Network Setup]. For details about setting items under "Configuring the Printer for the Network", see Software Guide. ❒ The 802.11b interface unit cannot be used simultaneously with a standard ethernet interface. ❒ In the [SSID] menu, if blank is specified in 802.11 Ad hoc mode or Ad hoc mode, "ASSID" appears. A Press the {Menu} key. The [Menu] screen appears. 96