Ricoh IM 4000 User Guide - Page 273

When a Message Appears While Using the Printer Function Message Cause Solution and reference "86: The parameter for the control code is invalid." The parameter in the control Specify the correct parameter. code is incorrect. "92: The print job was cancelled." (displayed in the error history) Printing is canceled from the To perform printing, operate the control control panel. panel again. "98: Failed to access the Accessing the hard disk hard disk." failed. Turn off the power of the machine, wait for 10 seconds or more after confirming that the main power indicator is turned off, and then turn on the power. page 17 "Turning On and Off the Power" "99: RTIFF Error" When printing a file from an SD card or USB flash memory device, the file to print is in an unsupported format or corrupt. Check the data to print. "BAI: Job Cancelled Because Authentication Settings Changed" The authentication setting was changed during printing, so printing was canceled by the auto job cancel function. Check the authentication setting. "BAJ: Paper Output Option Malfunction" A peripheral equipment had a problem, so printing was canceled by the auto job cancel function. Contact your service representative. "CB: Password Error" The entered password was incorrect, so printing was canceled by the auto job cancel function. Confirm the correct password for the document and enter it. "CC: User ID Error" The user ID was invalid, so Enter the correct login username. Confirm printing was canceled by the login username with the user the auto job cancel function. administrator. 271