Ricoh MP 3054 User Guide - Page 181
Envelopes
View all Ricoh MP 3054 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 181 highlights
Recommended Paper • Select [Thick Paper 1], [Thick Paper 2], [Thick Paper 3], or [Thick Paper 4] as the paper thickness in [Tray Paper Settings]. • Even if thick paper is loaded as described above, normal operations and print quality might still not be possible, depending on the paper type. • Prints might have prominent vertical creases. • Prints might be noticeably curled. Flatten out prints if they are creased or curled. Envelopes This section gives you various details about and recommendations concerning envelopes. • Do not use window envelopes. • Misfeeds might occur depending on the length and shape of the flaps. • Only envelopes that are at least 148 mm (5.9 inches) wide and whose flaps are open can be loaded in the orientation. • When loading envelopes in the orientation, load them with flaps fully open. Otherwise, they might not feed into the machine. • Before loading envelopes, press down on them to remove any air from inside, flatten out all four edges. If they are bent or curled, flatten their leading edges (the edge going into the machine) by running a pencil or ruler across them. In copier mode The way to load envelopes varies depending on the orientation of the envelopes. When copying onto envelopes, load them according to the applicable orientation shown below: 179