Ricoh MP 3054 User Guide - Page 241
Connecting the Machine/ System, Maintenance Using telnet
View all Ricoh MP 3054 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 241 highlights
Messages Displayed When You Use the Scanner Function Message Cause "Cannot find "XXX" scanner used for the previous scan. "YYY" will be used instead." ("XXX" and "YYY" indicate scanner names.) The main power of the previously used scanner is not set to "On". "Cannot find "XXX" scanner used for the previous scan. "YYY" will be used instead." ("XXX" and "YYY" indicate scanner names.) The machine is not connected to the network correctly. "Communication error has occurred on the network." "Scanner is not available. Check the scanner connection status." A communication error has occurred on the network. The machine's power is off. Solution Check whether the main power of the scanner used for the previous scan is turned on. • Check that the previously used scanner is connected to the network correctly. • Cancel the personal firewall of the client computer. For details about firewall, see Windows Help. • Use an application such as telnet to make sure SNMPv1 or SNMPv2 is set as the machine's protocol. For details about how to check this, see "Remote Maintenance Using telnet", Connecting the Machine/ System Settings. • Select the scanner used for the previous scan. Check whether the client computer can use the TCP/IP protocol. Turn on the power. 239