Ricoh MP 3054 User Guide - Page 218

10. Troubleshooting Message Cause Solution "Error occurred while processing an Unauthorized Copy Prevention job. Job cancelled." In [Administrator Tools] under [System Settings], priority was specified to be given to Unauthorized Copy Prevention Printing set on this machine. Cancel [Unauthorized Copy Prevention Printing] for the printer driver. For details about how to cancel the settings, see the printer driver Help. "Collate Cancelled" Collate was canceled. Turn off the power, and then back on again. If the message appears again, contact your service representative. "You reach the usage limit. This job has been cancelled." The number of pages the user is permitted to print has been exceeded. For details about print volume use limitation, see Security Guide. "Receiving data failed." Data reception was aborted. Resend the data. "Sending data failed." The machine received a command to stop transmission from the printer driver. Check if the computer is working correctly. "The selected paper size is not supported. This job has been cancelled." Job reset is automatically performed if the specified paper size is incorrect. Specify the correct paper size, and then print the file again. "The selected paper type is not supported. This job has been cancelled." Job reset is automatically performed if the specified paper type is incorrect. Specify the correct paper type, and then print the file again. When there is a problem with the print settings Message "Booklet/Half Fold Error" "Classification Code is incorrect." Cause Solution The job was canceled because you specified invalid settings for saddle stitching or half fold. Check the settings for saddle stitching or half fold. The classification code has not been entered, or the classification code has been entered incorrectly. Enter the correct classification code. 216