Ricoh MP161SPF Fax Reference - Page 134

Reception Note ❒ You can turn this function on or off in the User Parameters (switch 02, bit 3) in the Fax Features menu. Reference "Fax Features", General Settings Guide If There Is No Paper of the Correct Size If there is no paper in the machine that matches the size of a received document, 3 the machine will choose a paper size based on the paper available. Reduction in Sub-scan Direction Enabled Page Separation Threshold 20 mm (0.79") Width or Length Priority Width Note ❒ The document is split over two sheets of paper depending on the paper size. ❒ Paper placed in the bypass tray is not usually selected for printing a received document. ❒ Widths that this machine can receive are A4 and LT (81/2"×11"). Any docu- ments narrower than A4 or LT (81/2"×11") are received at A4 or LT (81/2"×11") width. The length of documents depends on the document. ❒ The paper size used to print a received document may be different from the size of the sent original. Reference p.125 "Page Separation and Length Reduction" Setting priority trays With the same size of paper loaded into multiple trays, you can make the machine use one tray for one function and another tray for another function. For example, you may load white A4 paper into tray 1 to use when making copies, and yellow A4 paper into tray 2 to use when printing received faxes. You can then easily identify for which purpose paper has been output. You can perform this setting in "Ppr Tray Priority:Fax" in "System Settings". Note ❒ When a different size of document from the priority tray is received, the tray containing the same size of paper as the received document is used. Reference "System Settings", General Settings Guide 126