Ricoh MP161SPF Fax Reference - Page 146

Changing/Confirming Communication Information Communication Failure Report This report is printed when a document could not be successfully transmitted with Memory Transmission. If the machine is set up to print a Communication Result Report, this report is not printed. Use it to keep a record of failed transmissions so you can send them again. Note ❒ You can select whether the Communication Failure Report is automatically printed using the User Parameters (switch 04, bit 1) in the Fax Features menu. ❒ This report is only printed if the Communication Result Report is turned off and a document could not be successfully transmitted with Memory Trans- 4 mission. ❒ You can select whether to include part of the original image on the report with the User Parameters (switch 04, bit 7) in the Fax Features menu. ❒ You can set whether or not to display a destination with the User Parameters (switch 04, bit 4) in the Fax Features menu. ❒ You can set whether or not to display a sender name with the User Parameters (switch 04, bit 5) in the Fax Features menu. ❒ The Pg(s) column gives the total number of pages. The Page Not Sent column gives the number of pages that could not be sent successfully. ❒ "Unprogrammed" indicates that the document could not be sent because the forwarding destination is not programmed. ❒ "--" indicates that the Internet Fax document was sent to the mail server programmed in this machine. (However, this does not mean the e-mail was delivered.) Reference "Fax Features", General Settings Guide 138