Samsung ML-1450 User Manual (user Manual) (ver.1.00) (English) - Page 112
Enter, version, exit to a Dos prompt
View all Samsung ML-1450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Solving General Printing Problems Problem Possible Cause The printer prints, but The printer cable is the text is wrong, loose or defective. garbled, or incomplete. Solution Disconnect the printer cable and reconnect it. Try a print job that you know works. If possible, attach the cable and printer to another computer and try a print job that you know works. Finally, try a new printer cable. The wrong printer driver was selected. Check the application's printer selection menu to make sure that your printer is selected. The software application Try printing a job from another is malfunctioning. application. The operating system is malfunctioning. If printing from Windows (any version), exit to a Dos prompt and verify functionality with the following command: At a C:\ prompt, type Dir LPT1, then press Enter. (This assumes you are connected to LPT1.) Exit Windows and reboot the computer. Turn the printer off and then back on again. Pages print, but are totally blank. The toner cartridge is Replace the toner cartridge. defective or out of toner. The sealing tape may still be in the toner cartridge. Remove the toner cartridge and pull out the sealing tape. Reinstall the toner cartridge, and check by printing a demo page. The file may have blank Check the file to make sure that it pages. does not contain blank pages. Some parts, such as the controller or the board may be defective. Contact a service representative. PROBLEM SOLVING 7.5