Samsung ML-1450 User Manual (user Manual) (ver.1.00) (English) - Page 195
with the connector on the control board., Push the card firmly into the connector
View all Samsung ML-1450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 195 highlights
Network Interface Card 6 Align the connector on the network card with the connector on the control board. Push the card firmly into the connector until it is completely inserted in place. 7 Tighten the two screws as shown. 8 Tighten the two screws, then replace the plate. 9 Reconnect the power cord and network cable, then turn the printer on. Note: For information on configuring and using the printer on a network environment, refer to the documentation provided with the network card option. F.6 PRINTER OPTIONS
F.
6
P
RINTER
O
PTIONS
7
Tighten the two screws as shown.
8
Tighten the two screws, then replace
the plate.
9
Reconnect the power cord and network
cable, then turn the printer on.
Note:
For information on configuring and using the printer on a network environment, refer to
the documentation provided with the network card option.
Network Interface Card
6
Align the connector on the network card
with the connector on the control board.
Push the card firmly into the connector
until it is completely inserted in place.