Samsung ML-1450 User Manual (user Manual) (ver.1.00) (English) - Page 191
Memory and PostScript SIMMs
View all Samsung ML-1450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
Memory and PostScript SIMMs Additional printer memory and the PostScript option are provided on SIMMs (single in-line memory modules). This procedure is applicable to either option. Notes: • Since PostScript setting requires 12 MB of printer memory and the ML-1450 comes with 4 MB standard, installation of the PS SIMM requires installation of a 8 MB SIMM memory as well. • ML-1451N has 16 MB RAM standard, so additional memory is not required to install option PS SIMM. 1 Turn the printer power off and unplug all cables from the printer. 2 Remove the two screws on the rear of the printer, then remove the control board cover. 3 Locate the PS SIMM slot (the lower slot on the left as shown) and the memory SIMM slot (the upper slot) on the control board. They are not interchangeable. • To install the memory SIMM, continue with Step 4. • To install the PS SIMM, go to Step 6. F.2 PRINTER OPTIONS Memory DRAM MODULE FLASH-ROM MODULE PS SIMM