Sanyo CE42LH2WP IR Command List - Page 12

UK5 Specification of expanding serial command 6. Read Command Table 6. 1 Image control Read Command Table Status read command CR_BRIGHT[CR] CR_CONT[CR] CR_COLOR[CR] CR_TINT[CR] CR_SHARP[CR] CR_WBAL[CR] CR_WBAL-R[CR] CR_WBAL-G[CR] CR_WBAL-B[CR] CR_NZRED[CR] CR_FILM[CR] CR_IMAGE[CR] CR_DCDI[CR] CR_ACCACM[CR] CR_CCS[CR] CR_MPEGNR[CR] Item Status of Brightness. Status of Contrast. Status of Color. Status of Tint. Sharpness. Status of White Balance Mode information. Status of White Balance Red Status of White Balance Green Status of White Balance Blue Status of Noise reduction setting. Status of Film mode setting. Status of Image selection. The same as PICTURE mode Status of DCDi setting. Status of ACC/ACM setting. Status of CCS setting. Status of MPEG NR setting. 6. 2 PC Read Command Table Status read command CR_H-POS[CR] CR_V-POS[CR] CR_PHASE[CR] CR_CLOCK[CR] Item Status of Horizontal position. Status of Vertical position. Status of PHASE value. Status of CLOCK value. 6. 3 Video Read Command Table Status read command Item CR_SERSYS[CR] Status of current signal system. 6. 4 Input Read Command Table Status read command CR_INPUT[CR] CR_SOURCE[CR] CR_SYSTEM[CR] Item Status of Input selection. Status of Input source mode. Status of system of Input mode. 6. 5 Screen Read Command Table Status read command Item CR_SCREEN[CR] Status of screen size The same of WIDE mode 6. 6 Time Read Command Table Status read command CR_PANELH[CR] CR_MONH[CR] Item Status of accumulated lifetime of panel. The same as CR_LAMPH Command Status of accumulated lifetime of monitor The same as CR_PROJH Command Execute functional command Ver. Rev.G Page 12