Sanyo CE42LH2WP IR Command List - Page 18

UK5 Specification of expanding serial command 8. 4. 9 CF_FILM Command Command " "[CR] " " "" "" "" Release Film mode Select Film mode Switch upward Switch downward Detail Release Film mode. Available only normal Power ON condition. Status Receiving OK Receiving NG " "[CR] "Error code"[CR] 8. 4. 10 CF_IMAGE Command Command " " " " " " " " " Eco "[CR] Personal Dynamic Standard Detail Status Select image mod. Available only normal Power ON condition. Selected mode is stored in EEPROM. Then setup image mode is effective after the set is turned ALL OFF. Receiving OK " "[CR] Receiving NG "Error code"[CR] 8. 4. 11 CF_DCDI Command Command " "[CR] " " "" "" "" Select DCDi OFF. Select DCDi ON. Switch upward Switch downward Detail Release DCDi setup. Available only normal Power ON condition. Status Receiving OK Receiving NG " "[CR] "Error code"[CR] 8. 4. 12 CF _ACCACM Command Command " "[CR] " " " " " " " " "" "" Set up ACC/ACM to OFF. Set up ACC/ACM to Vivid. Set up ACC/ACM to Cinema. Set up ACC/ACM to Sports. Switch upward Switch downward Detail Release ACC/ACM setup Available only normal Power ON condition. Status Receiving OK Receiving NG " "[CR] "Error code"[CR] Execute functional command Ver. Rev.G Page 18