Sanyo CE42LH2WP IR Command List - Page 15
Functional Execution Command, Format, 2 Example of transmission, 3 Condition of operation
![]() |
UPC - 086483077777
View all Sanyo CE42LH2WP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
UK5 Specification of expanding serial command Functional Execution Command .1 Format PC issues a command in format as below. "CF_ Command " [CR] "CF_ Command _ " %1 [CR] "CF_ " means header, Command means the line of character, %1 means parameter "_" menas space (Stop of Command / Parameter) Monitor set returns status after decording data and redady to receive command. "000 " [CR] (0x06, 0x0D) Receiving functional execution command "nnn " [CR] Except indication "000", Command does not execute because of any reason. Receiving the data whicih can not decord, then "?" [CR] is returned. 8.2 Example of transmission Set the monitor brightness 32 by expanding Command. PC → Monitor "CF_BRIGHT_32"[CR] PC ← Monitor "000"[CR] received OK 8.3 Condition of operation The monitor is following condition, some command executions are restricted. The status is available in following condition. Status of monitor set Stand-by mode Abnormal temperature (Stand-by Abnormal power condition Standby Power save condition Effective command execution. C00 POWER ON CF POWER ON C00 POWER ON CF POWER ON C00 POWER ON CF POWER ON C00 POWER ON C01 POWER OFF CF POWER ON CF POWER OFF Note While above condition, the error massage appears even in receiving other command. Execute functional command Ver. Rev.G Page 15
![](/manual_guide/products/sanyo-ce42lh2wp-ir-command-list-d907d8f/15.png)