Sanyo CE42LH2WP IR Command List - Page 20

UK5 Specification of expanding serial command 8. 5. 3 CF_CLOCK Command Command " "[CR] " " Direct assignment of value of Horizontal position. " " is maximum value, and is indicate current Total Dots Display Area H. Detail Set up Clock of PC input signal. Available only normal Power ON condition. Status Receiving OK " Receiving NG " "[CR] "[CR] Input is Video control 8. 5. 4 CF_PHASE Command Command " "[CR] " " Direct assignment of value of Vertical position. " " is maximum value. Detail Set up of Phase of PC input signal Available only normal Power ON condition. Status Receiving OK " Receiving NG " "[CR] "[CR] Input is Video control 8. 6 Input control Command 8. 6. 1 F_INPUT Command Command " "[CR] " " " " " " " " " " " " "" " " "" "" Select AV1 (Not changing Source) Select RGB Select AV2 (Changing Source to YpbPr) Select AV2 (Changing Source to RGBHV) Select AV3 (Not changing Source) Select DVI (Not changing Source) Select PC (Not changing Source) Select Network Change forward Change backward Detail Select input. Available only normal Power ON condition. This Command is just switching Input, not changing Source. Status Receiving OK " Receiving NG " "[CR] "[CR] Execute functional command Ver. Rev.G Page 20