Sanyo CE42LH2WP IR Command List - Page 28

UK5 Specification of expanding serial command 8. 10. 17 CF_RCINHIBITION Command Command " "[CR] "" " " Set up RC inhibit ON Set up RC inhibit OFF Detail Set up RC inhibit ON/OFF Available only normal Power ON condition. Receiving RC inhibit ON command while RC inhibit ON is effective, the RC inhibit ON keeps on effective. Status " " is returned Status Receiving OK Receiving NG " "[CR] "Error code"[CR] 8. 11 Other Command 8. 11. 1 CF_KEYEMU Command Command [CR] Execute Auto PC Adj. Operation. The same opeariton as "AUTO PC" from RC hand set. PC Adj. Operation is interrupted receiging command while Auto PC Adj. is working. Detail The same opetaion as "AUTO PC" from RC hand dest. Status Receiving OK Receiving NG "０００"[CR] "Error code"[CR] 8. 11. 2 CF_POWER Command Command " "[CR] "" Turn Power ON " " Turn Power Off To confirm this command is accepted, the read command is effective. If thermal failure is occurred, returned "000" does not work as confirmation. Detail Set up Power ON / OFF Status Receiving OK Receiving NG " "[CR] "Error code"[CR] 8. 11. 3 CF_FREEZE Command Command " "[CR] "" Set up Freeze " " Release Freeze "" Select forward On → Off → On → "" Select backward On → Off → On → Since only On Off are selectable, UP DN is the same operation. Detail Set up Freeze Available only normal Power ON condition. Receiving Freeze command while Freeze is effective, the Freeze keeps on effective. Status " " is returned Status Receiving OK Receiving NG " "[CR] "Error code"[CR] Status command Ver. Rev.A Page 28