Sanyo CE42LH2WP IR Command List - Page 7
Overview, Serial Interface Specification, Transfer Specification, Connection, MONITOR SET, COM 1,
UPC - 086483077777
View all Sanyo CE42LH2WP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
UK5 Specification of expanding serial command 1. Overview 1. 1 This specification define MONITOR SET control commands for UK5 chassis products communicating with LD-Net. 1. 2 These control commands are originally developed for the communication with LD-Net, but also can be used to control a MONITOR SET through RS-232C from a PC. These commands are called "Expanding serial commands". 2. Serial Interface Specification 2.1 Transfer Specification Item Specification Synchronous system Asynchronous Transmission Speed 9600 / 19200 Data Length 8 bit Parity None Stop Bit 1 Flow Control None Note Note Transmission speed: initial setting value is 19200. Transmission speed can be changed in hotel option menu. 2.2 Connection Dedicated serial cable for MONITOR SET must be used for the connection bwtween PC and MONITOR SET. PC COM 1 MONITOR SET Control Port D-Sub 9 Pin D-Sub 9 Pin Ver. Page 7