Sanyo CE42LH2WP IR Command List - Page 51
Specification Command with Address, 3 Status read command with address, 3. 1 Format, Address,
![]() |
UPC - 086483077777
View all Sanyo CE42LH2WP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
UK5 Specification of expanding serial command 10. 2. 2 Sequential execution functions The function needed sequential command, the same control as remote control Receiving. That is 1. Sending command every in 100 second 2. Receiving a command, execute function sequentially within 120 s. 3. Receiving the same command in 120 second, then execute sequentially in 120 s from that time. 4. If there is no command receiving any more, the command execution is stopped. 5. If any other command is received within 120 m seconds, the sequential command is stopped. 10. 3 Status read command with address 10. 3. 1 Format Issuing following command from PC "A" Address "CR" Command [CR] or "A" Address "CF_" Command [CR] Address 3 digit from " "" " The monitor decodes then return requested data only when the receiving data including address existing. Requested data [CR] Requested data Line of character When the receiving data is not readable, " " CR is returned. 10. Specification Command with Address Ver. Rev.A Page 51
![](/manual_guide/products/sanyo-ce42lh2wp-ir-command-list-d907d8f/51.png)