Sanyo CE42LH2WP IR Command List - Page 9

UK5 Specification of expanding serial command 5. Functional Execution Command 5. . Image control Command Execute command CF_BRIGHT_%1[CR] CF_CONT_%1[CR] CF_COLOR_%1[CR] CF_TINT_%1[CR] CF_SHARP_%1[CR] CF_WBAL[CR] CF_WBAL-R_%1[CR] CF_WBAL-G_%1[CR] CF_WBAL-B_%1[CR] CF_NZRED_%1[CR] CF_FILM_%1[CR] CF_IMAGE_%1[CR] CF_DCDI_%1[CR] CF_ACCACM_%1[CR] CF_CCS_%1[CR] CF_MPEGNR_%1[CR] Item Set Brightness value. Set Contrast value. Set Color value. Set Tint value. Set Sharpness value. Set White Balance Mode. Set White Balance Red value. Set White Balance Green value. Set White Balance Blue value. Set Noise reduction mode. Set Film mode. Set Image mode. The same as Set DCDi mode Set ACC/ACM mode. Set CCS mode. Set MPEG NR mode. PICTURE mode 5. . PC control Command Execute command CF_H-POS_%1[CR] CF_V-POS_%1[CR] CF_CLOCK_%1[CR] CF_PHASE_%1[CR] Item Set Horizontal position value. Set vertical position value. Set Clock value. Set Phase value. 5. . Input control Command Execute command CF_INPUT_%1[CR] CF_SOURCE_%1[CR] CF_SYSTEM_%1[CR] Select Input mode. Set Input source. Set system. Item 5. . Screen control Command Execute command CF_SCREEN_%1[CR] Item Select screen mode. The same as WIDE mode 5. . Time control Command Execute command CF_PANELH_%1[CR] Item Initialize panel accumulated time. The same as CF_LAMPH 5. . Sound control Command Execute command CF_VOLUME_%1[CR] CF_MUTE_%1[CR] Item Set sound value. Control Sound mutes ON/OFF. Item The table of executive command Ver. Rev.A Page 9