Sanyo CE42LH2WP IR Command List - Page 19

UK5 Specification of expanding serial command 8. 4. 13 CF_CCS Command Command " "[CR] " " " " " "" "" Set up CCS to OFF. Set up CCS to Auto. " Set up CCS to Standard. Switch upward Switch downward Detail Release CCS setup Available only normal Power ON condition. Status Receiving OK Receiving NG " "[CR] "Error code"[CR] 8. 4. 14 CF_MPEG NR Command Command " "[CR] " " "" "" "" Set up MPEG NR to OFF. Set up MPEG NR to ON. Switch upward Switch downward Detail Release MPEG NR set up Available only normal Power ON condition. Status Receiving OK Receiving NG " "[CR] "Error code"[CR] 8.5 PC control Command 8. 5. 1 CF_H POS Command Command " "[CR] " " Direct assignment of value of Horizontal position. " " is maximum value, and is indicate cent Total Dots Display Area H. Detail Set up Horizontal position of PC input signal. Available only normal Power ON condition. Status Receiving OK " Receiving NG " "[CR] "[CR] Input is Video control 8. 5. 2 CF_V POS Command Command " "[CR] " " Direct assignment of value of Vertical position. " " is maximum value, and is indicate current Total Line Display Area V. Detail Set up Vertical position of PC input signal. Available only normal Power ON condition. Status Receiving OK " Receiving NG " "[CR] "[CR] Input is Video control Execute functional command Ver. Rev.G Page 19