Sanyo CE42LH2WP IR Command List - Page 49
Signal status Read Command Same as 9.12.3
UPC - 086483077777
View all Sanyo CE42LH2WP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
UK5 Specification of expanding serial command 9. 13. 5 Signal status Read Command (Same as 9.12.3) Command "CR SIGNAL" [CR] Detail Read the signal status. Acceptable "%1" [CR] Response %1 "000 YES" = No signal "000 NO" = Signal exists. Unacceptable "%1" [CR] 9. 13. 6 Child lock setting Read Command Command "CR CHILD" [CR] Detail Reads the child lock setting. Acceptable "%1" [CR] Response %1 "000 OFF" = OFF "000 ON" = ON Unacceptable "%1" [CR] 9. 13. 7 Power save setting Read Command Command "CR PSAVE" [CR] Detail Read the PSAVE setting. Acceptable "%1" [CR] Response %1 "000 OFF" = OFF "000 ON" = ON Unacceptable "%1" [CR] 9. 13. 8 Panel usage time Read Command Command "CRTM" [CR] Detail Read the Panel Usage Time Acceptable "%1" [CR] "000 *****" Response %1 "*****" is Panel Usage Time in hour by 5 digits. Ex. "000 00123" means 123 hours Unacceptable "?" [CR] 9. 13. 9 RC inhibitions Read Command Command "CR RMC" [CR] Detail Read the Remote Control inhabitation state Acceptable "%1" [CR] Response %1 "000 OFF" = OFF : operable "000 ON" = ON : inoperable Unacceptable "?" [CR] 10. Specification Command with Address Ver. Rev.A Page 49