Sanyo CE42LH2WP IR Command List - Page 26

UK5 Specification of expanding serial command 8. 10. 11 CF_ON PROG Command Command " "[CR] " " Release On Program " " AV1 is selected after Power is On " " RGB is selected after Power is On " " AV2 is selected after Power is On " " AV3 is selected after Power is On " " DVI is selected after Power is On "" PC is selected after Power is On " " NETWORK is selected after Power is On " " Select forward ( Off → AV1 → RGB → AV2 ) " " Select backward (On → PC → DVI → AV3 → AV2 → RGB ) Detail Set up and release On Program Available only normal Power ON condition. Once assigned ON/OFF mode is stored in , the selected language is effective. Status Receiving OK Receiving NG " "[CR] "Error code"[CR] 8. 10. 12 CF_WINTER MODE Command Command " "[CR] "" " " "" "" Set up Winter mode ON Set up Winter mode OFF Select forward On → Auto → Off → On → Select backward On → Auto → Off → On → Detail Set up Winter mode ON / AUTO / OFF Available only normal Power ON condition. Receiving ON command while Winter mode is active, the Winter mode keeps on effective. Status " " is returned Status Receiving OK Receiving NG " "[CR] "Error code"[CR] 8. 10. 13 CF_PANEL_PROTECT Command Command " "[CR] "" Set up Panel protect ON " " Set up Panel protect OFF "" Select forward On → Off → On → "" Select backward On → Off → On → Since only On Off are selectable, UP DN is the same operation. Detail Set up Panel protect ON/OFF Available only normal Power ON condition. Receiving Paneled ON command while Panel ON is effective, the panel ON keeps on effective. Status " " is returned Status Receiving OK Receiving NG " "[CR] "Error code"[CR] Status command Ver. Rev.A Page 26