Sanyo CE42LH2WP IR Command List - Page 21

UK5 Specification of expanding serial command 8. 6. 2 CF_SOURCE Command Command " "[CR] " " Input is selected AV2 " " " " "" Select Y,Pb/Cb,Pr/Cr Select RGBHV Change forward Change backward Detail Select source of AV2 Input Available only normal Power ON condition. If assigned does not match with condition, then " does not execute. Status Receiving OK " Receiving NG " "[CR] "[CR] "is returned and 8. 6. 3 CF_SYSTEM Command Command " " " " AV1 AV3 " " " " "[CR] " " " " " " Select system Auto Select NTSC " Select NTSC4.43 Select PAL Select SECAM Select PAL-M Select PAL-N RGB No Automatically detected Detail Status AV2(YP Pr) No Automatically detected AV2(RGBHV DVI PC No Automatically detected Select system for current selected Input Available only normal Power ON condition. If assigned does not match with condition, then " "is returned and does not execute. Input is Network, " "[CR] is returned and does not execute. Receiving OK " "[CR] Receiving NG "Error code"[CR] Execute functional command Ver. Rev.G Page 21